Simple Recording
Turn on the TV and select the VCR channel 3 or 4 (or AV mode).
EN23
LOAD A CASSETTE |
Make sure the record safety tab is intact. If not, cover the |
1 hole with adhesive tape before inserting the cassette. |
SELECT RECORDING |
CHANNEL |
Press CH5° |
keys, then press ENTER. (The channel changes after a |
2 few seconds whether you press ENTER or not.) |
● If you use the RF connection, by pressing the TV/VCR |
V/VCR
1
NUMBER 4
7
1
PLAY
REC
PLAY
CH
REC | STOP/EJECT | PAUSE |
|
| |
ENTER |
|
|
2 3
2
5 6
8 9
0 4
CH
SP/EP
PAUSE
3
STOP
| button, select VCR mode to view the program to be |
| recorded. |
|
|
| SET TAPE SPEED |
3 Press SP/EP to set the recording speed. | |
| START RECORDING |
| Press and hold REC and press PLAY on the remote |
4 control, or press REC on the VCR's front panel. | |
| PAUSE/RESUME |
5 | RECORDING |
Press PAUSE. Press PLAY to resume recording. | |
| |
● During record pause, you can change the recording | |
channel by using the CH5° | |
| keys. |
|
|
| STOP RECORDING |
| Press STOP or STOP/EJECT. Then press STOP/EJECT to |
6 remove the cassette. |
Accidental erasure prevention
●To prevent accidental recording on a recorded cassette, remove its record safety tab.
To record on it later, cover the hole with adhesive tape.
Record safety tab