JVC HR-VP674U manual SET Mode, Picture Control, CH 5 or Shuttle, Or Shuttle Plus % to

MENU

OK CH

1 2 3

2

4 5 6

7 8 9

0 4

1

3	OK
MENU

SHUTTLE PLUS

EN27

Picture Control

This feature helps you to adjust the playback picture quality according to your preference. *The default setting is "AUTO."

	ACCESS MAIN MENU
	SCREEN
1 Press MENU.
	ACCESS FUNCTION SET
	SCREEN
	Move the highlight bar (arrow) to "FUNCTION SET" by
	pressing CH5° or SHUTTLE PLUS%Þ, then press OK
2 or SHUTTLE PLUS%.
	SELECT PICTURE CONTROL
	SET MODE		FUNCTION
	Move the highlight bar		AUTO PICTURE	ON
	(arrow) to "PICTURE	=PICTURE CONTROL		AUTO
3 CONTROL" by pressing			AUTO TIMER	OFF
			SUPERIMPOSE	ON
	CH 5° or SHUTTLE		AUTO SP=EP TIMER	OFF
	PLUS %Þ, then press OK		NEXT PAGE
	or SHUTTLE PLUS %to		SELECT WITH (5,°) AND (OK)
	select the desired mode.		PRESS (MENU) TO END
AUTO*: Normally select
	AUTO.
	It automatically adjusts the picture quality.

*When AUTO PICTURE is set to OFF (☞ pg. 26), you can only select NORM instead of AUTO.

EDIT: Select when you dub tapes.

SOFT: Select when you want to soften the picture.

SHARP: Select when you want to sharpen the picture.

NOTE:

•When you select EDIT, SHARP or SOFT, the

selected mode will not change until you select again.

•When you select EDIT to dub tapes, be sure to select AUTO (or NORM when AUTO PICTURE is set to OFF) after you finish dubbing the tapes.

RETURN TO NORMAL

SCREEN

4 Press MENU.

NOTE:

Select EDIT when you are dubbing tapes. Refer to page 45.