Operation
Heat Operation
Display panel
Remote controller
1. Unit start
Link with electronic power.
Press ON/OFF on the remote controller, unit starts.
The liquid crystal will display the working state of last time (Except Timer, Sleep, Power/Soft and Health airflow).
2.Select operation mode
Press MODE | button. For each press, operation mode | ||||||||
changes as | follows: |
|
|
|
|
|
| ||
Remote controller: |
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
|
|
|
|
| AUTO | COOL | DRY | FAN | HEAT |
| |
Then
Select HEAT operation
3.Select temp.setting Press TEMP. button
Every time the button is pressed, temp.setting increase 1 C,if kept depressed, it will increase rapidly
Every time the button is pressed, temp.setting increase 1 C,if kept depressed, it will decrease rapidly
Select a desired temperature.
4.Fan speed selection
Press FAN button. For each press, fan speed changes as follows:
Remote controller:
LOW MED IHAUTO
Air conditioner is running under displayed fan speed
IN HEAT mode, warm air will blow out after a short period of the time due to
When FAN is set to AUTO, the air conditioner automatically adjusts the fan speed according to room temperature.
5.Unit stop
Press ON/OFF button, the unit stops.
13
