Operation
Timer On-Off Operation
Display panel
Remote Controller
Set clock correctly before starting TIMER operation.
1.After unit starts, select your desired operation mode Operation mode will be displayed on LCD.
2.Timer mode selection
Press TIMER button to change TIMER mode. Every time the button is pressed, display changes as follows: Remote controller:
BLANK
TIMER ON | TIMER OFF | TIMER |
Then select your desired TIMER mode (TIMER ON - OFF).
" | " will flash. | |
3.Time setting |
| |
Press HOUR | button. | |
Every time the button is pressed, time setting
increases 1 min , if kept depressed, it will increase r Every time the button is pressed, time setting decreases 1 min, if kept depressed, it will decrease ra It can be adjusted within 24 hours.
4.Timer confirming for TIMER ON
After setting correct time, press TIMER button to confirm
" 
" on the remote controller stops flashing.
" 
" starts flashing.
Time displayed: Unit starts or stops at x hour x min.
5.Time setting for TIMER OFF
Just press HOUR button ,follow the same procedure in "Time setting for TIMER ON"
6.Time confirming for TIMER OFF
After time setting,press SET button to confirm.
"
" on the remote controller stops blinking. Time displayed:Unit stops at x hour x min.
To cancel TIMER mode
Just press TIMER button several times until TIMER mode disappears.
According to the Time setting sequence of TIMER ON or TIMER OFF, either
17
