Braun OC15525 A, 3718 Pressure sensor, Memory timer, INDICATOR bristles, Replacement brushheads

1	2	3
4		5
6		7

Pressure sensor

For safety and optimum brushing results, the toothbrush has a pressure control system: If too much pressure is applied, the oscillating movement of the brushhead will continue, but the pulsation will stop. There is a noticeable change in feeling and sound when the pressure sensor is activated.

Memory timer

An incorporated timer memorises the elapsed brushing time, even when the handle is briefly switched off (max. 30 seconds). After two minutes – which is the minimum recommended brushing time – the timer signals by a short stutter.

INDICATOR® bristles

The INDICATOR® bristles help you monitor and improve the brushing performance.

With proper brushing, twice a day for two minutes, the blue colour on the INDICATOR® bristles will disappear half-way down within 3-4 months, signalling it is time to replace the brushhead.

Replacement brushheads

Available at your retail store or Braun Service Centres.

After use

Rinse the brushhead thoroughly under running water for several seconds with the handle switched on. Switch off the handle and take off the brushhead. Clean both parts separately under running water, then wipe them dry.

Environmental notice

The toothbrush handle is provided with a nickel-hydride rechargeable battery. To protect the environment, do not dispose of the product in the household waste at the end of its useful life. Open the handle as shown, remove the battery and dispose of it at your retail store or at appro- priate collection sites according to national or local regu- lations.

Caution: Opening the handle will definitely destroy it.

12