19
Err7 Motor Error Contact the maintenance personnel.
Err8 Water exceeds protecve level. Contact the maintenance personnel.
UNb
End
1:25 The remaining me is 1 hour 25 minutes.
19:30 ¬Status informaon: Preset me for delayed operaon.
Control panel lock funcon: Press the "Delay" and the "Start/Pause" buons simultaneously
for 3 seconds aer starng a program. It can no longer be changed by operang buons or
knobs. To unlock press the "Delay" and "Start/Pause" buons again for 3 seconds.
Power-off memory funcon: In case of abrupt power failure or the need to cut off the power
during a program cycle, the present sengs will be saved and the preset operaon will
resume when the power is on again.
To cancel a program. Press the "Start/Pause" buon, then switch off the power and the
program is automacally cancelled. Turn the program selector again to choose another
program.
During the spin process, if too much foam is inspected, in order to protect the motor, the
washing machine will eliminate the foam automacally; the motor will stop and the drain
pump will drain the water connuously for 90 seconds. If it happens more than 3 mes, the
motor will stop unl the end of cycle without spinning.
0DLQWHQDQFH
End of wash cycle.
Aer the last rinsing cycle finishes, spinning fails completely due to unbalance of the
laundry.