9
Extra Rinse
Start/Pause
Buon
Press this buon, the washing machine will perform addional rinses.Press
the buon once to select one addional rinse. The display will show"P-1".
Press the buon repeatedly and the screen will display "P-2''or "P-3'',
indicang two or three addional selected rinses. The "extra rinse light" is
acvated and flashes during the performance. "P-1/2/3" is displayed
alternang with the remaining me. The light turns off and the display
disappears when the extra rinse ends.
When the washing machine is connected to the power socket and a
program is selected, lightly touch this buon to start operaon. During
a wash cycle, touch it lightly ,operaon will stop and the digits on the
screen start blinking. Touch it again to resume operaon. To cancel a wash
program during a wash cycle, touch this buon, when the digits on the
screen start blinking, press the Power switch, the program will be cancelled.
Before a washing program,select this program to set the washing load
(1/2Full),the washing machine will automacally adjust the water
consumpon and washing me.
Informaon as remaining wash me and error messages will be shown here.
Touch this buon lightly, the washing machine will start operaon aer a
period of me and the corresponding indicator will go on. The range is 0.5-24
hours; each touch of this buon increases a half hour. Aer the buon is set,
press the Start/Pause buon to start countdown of the set me (the me is
displayed on the screen unl the program ends).
Aer a wash program is started the display will go on and the
remaining wash me decreases. As the water pressure and
temperature may differ, the remaining me may be adjusted
accordingly. When the laundry is not balanced during spinning, the
me may be automacally prolonged.
Select this funcon when programe 1-9 is selected.
The delay me must be longer than the program me otherwise
the washing machine will start the wash program directly.
To cancel audible alarm
Alarm sound can be cancelled if it is required (not recommended)
Switch on the washing machine and turn the program knob to spin cycle, then press the
"Delay" and "Extra rinse" buon, hold on for 3 seconds.
The message "BEEP OFF” will be displayed on the screen, indicang that the alarm sound has
been cancelled.
To reinstate audible alarm
Switch on the washing machine and turn the program knob to spin cycle, then press the
"Delay" and "Extra rinse" buon, hold on for 3 seconds.The "BEEP ON" message will be
displayed on the screen, indicang that the alarm sound has been reinstated.
Funcons
7
8
ECO
9
LED Display
10
Delay
11