Haier HWM80-928NZP Put in the laundries, Usage of the detergent, How to use the whitener

Models: HWM80-928NZP

1 20
Download 20 pages 52.33 Kb
Page 12
Image 12

Put in the laundries

● The capacity of washing and spinning of the machine refer to the largest weight of the standard laundries under dry condition that can be washed or spinned in one time. One time washing quantity shall be lower than the rated capacity.

● The thickness, size, type of the cloth will influence the actual washing capacity. It is suitable for one time washing to put in reasonable amount of laundries and the laundries can be turned round in washing.

● Do not select “35L” (for HWM80-928NZP) or “26L” (for HWM70-928NZP) water level for laundries less than 1.0kg, so as to avoid splashing of water.

Usage of the detergent

How to use the washing powder

Control panel seat

Liquid whitener inlet

It is suggested to add washing powder into the box directly under fuzzy program and reserve program.

Dissolve directly inside the washing machine: (not applicable for fuzzy and reserve program)

1.Add some water(select “18L” water level for HWM80-928NZP and “14L” water level for HWM70-928NZP).

2.Add washing powder. Run for about 30s to fully dissolve the power. Then push the”Start/Pause” button.

3.Put in laundries. Select suitable water level. Push the “Start/Pause”button again.

Quick dissolving of washing powder:

1.Prepare warm water of 30°C and container.

2.Add washing powder while stirring to dissolve it completely.

Please add suitable washing powder as per the laundries quantity, the set water level and water quantity.

If you select “Quick” program, it is suggested to use liquid detergent instead of washing powder to guarantee the washing effect.

It is not recommended to use rich-foam washing powder.

Washing powder with poor quality or long- time storage may get caked. Please clean the detergent box in time.

How to use the whitener

Add water to decided level. Dilute the whitener with container, and then pour it into the liquid whitener inlet slowly.

Laundries with color or pattern is not colorfast, thus not applicable.

The whitener shall not touch laundries directly.

See to the manual of whitener for the usage

and dosage.

● For whitener in powder, dissolve it before using.

How to use the softener

HWM70-928NZP

Figure 1

Figure 2

Figure 3

Access for detergent and

 

Access for

washing powder

 

 

softener

 

 

 

 

Open

Close

Detergent box

Turn the inner tub, you will find a softener inlet as the figure 2, open the cover, put the softener into the inlet as the figure 3 before washing, close the cover and the softener will drop into the inner tub during the last time rising. After that, please close the detergent box.

HWM80-928NZP

Detergent box

Access for softener

Before washing put the softener into the box.

The softener will drop into the inner tub during the last time rising

The usage and dose of the softener as per the specifications of softener.

Refer to the list for the usage of the detergent: selection of the water level,water quantity and dosage of detergent.

After the softener is put in, please don’t place for a long time otherwise softener may solidify and cause flowing not smooth.

Remark:

Do not use softener if rinse times is not two.

12

Page 12
Image 12
Haier HWM80-928NZP Put in the laundries, Usage of the detergent, How to use the whitener, How to use the softener