Haier HWM80-928NZP user manual Safety precautions

Models: HWM80-928NZP

1 20
Download 20 pages 52.33 Kb
Page 4
Image 4

Safety precautions

Please plug the plug on special receptacle

with rated voltage. Be sure to use singlephase three pins receptacle. Ensure the earthing prong of the power receptacle is earthed reliably. Use leakage protector if possible.

The power cord plug should be convenient to be pluged in or pluged out with hand while the washing machine runs normally. Be sure to pull the plug out and close the water tap when the machine is idle, when moving the machine, or when cleaning the machine. Do not use wet hand to insert or pull out the power plug.

Do not bend ,extend, twist, bind by force. Do not press or nip it with weight.

Keep the pin of the power plug clean, if the power plug is polluted with dust, please wipe with dry cloth carefully.

If the power cord or the power plug is bad, to avoid risk it is required to have

it replaced by the technicians of our special shop or our customer care agent.

In case the washing machine is installed

Do not use water hotter than 50 °C .

on ground with carpet, do not block the

 

ventilation hole with carpet.

 

The ventilation holes

 

at the bottom

 

Carpet

 

Do not put the machine at damp place like

Do not wash water-proof laundries like

the bathroom. Never wash it with water.

the raincoat, bike covers etc. to avoid

Not put wet laundries on the control panel.

abnormal vibrations in spinning.

Do not let the machine share one receptacle with other electric appliances. If the power plug is damaged, or the plugging into the receptacle is loose,

do not use the plug any more.

4

Page 4
Image 4
Haier HWM80-928NZP user manual Safety precautions