How to change the direction of the drain hose
Remarks: In order to make sure of the correct of installation, it is suggested to change the direction of the drain hose with our company serviceman.
HWM70-928NZP
1.Dismantle the back cover of the washing machine.
2.Press the spring lamination lightly and pull the top segment of the drain hose decumbent then put down the drain hose from the drain hose frame.
Back cover
Drain hose frame
3.Put down the drain hose, squeeze the drain hose lightly and take off the hook, put the drain hose into the cabinet. Take off the small baffle which installed on the other drain outlet and install it on the side which won't install the drain hose.
4.Extend the drain hose from the other side and install it on the base by the drain hose frame
5.Install the back cover.
Spring lamination |
1.Please lean the washing maching gently down on soft items,such as towel, cloth, blanket, etc.(as indicated in Figure 1)
2.Dismantle the bottom plate.(as indicated in Figure 2)
3.Nip the end of the drain hose and remove the hook of fixing the drain hose.(as indicated in Figure 3)
4.Put your hand into the washing machine and undraw the drain hose clamp. Extend the drain hose in other side and fix it with the clamp. (as indicated in Figure 4)
5.Install the bottom plate and the hook of fixing the drain hose.
|
|
|
|
| Take off the |
|
|
|
|
|
|
| |
Figure 1 |
| Figure 2 |
| Figure 3 | drain pipe clip | |
|
|
| Figure 4 | |||
8
