Installation and adjustment

Please install and adjust the machine according to the requirement of the manual, which is very important for you to operate the machine safely and properly.

Install the bottom plate

After opening the package, please lean the washing machine gently down on soft items (like towel cloth, blanket, etc.). Install the bottom plate to the bottom of the machine with eight screws by a cross screwdriver, then lift the machine up gently. See to the figure:

Back

Front

Bottom plate Screw

Soft item

Adjust the installation position

The largest allowable slope of the shank base of the machine is 2 . The slanting or rough ground will result in unstable running or stoppage of the machine. Please adjust it with following methods:

Confirm it's horizontal:

If the bulb of the level meter at the balance display position is inside the standard circle, it indicates that the machine is horizontal. Otherwise you need to a d j u s t th e a d j u s t a b l e l e g o f t h e m a c h i n e .

Adjust the adjustable leg:

1.To twist the adjustable leg, please first lift up the leg side slightly, loosen the adjustable nut, and then twist the leg.

2.After adjustment, fasten the nut.

 

Air bubble

Suitable

Not suitable

Standard circle

Adjustable nut

Loosen Fasten

High Low Adjustable leg

4

Page 6
Image 6
Haier HWM8000 user manual Installation and adjustment, Confirm its horizontal, Adjust the adjustable leg