11
Use the operation buttonsOff
On: indicate the program about to run,o r indicate
the selected mode or indicate the wat er level
Flashing: indicate the running progra m
It displays “--” during detecting.
It displays total remained time during t he
running program (min).
It displays remained reserved time duri ng
reserve program hour
It displays abnormal symbol in abnormal
situation.(See to Page 14)
Program Applicable situation
SOAK Washing the relatively big thick or ver y
dirty laundries
STANDARD Common washing
If “STANDARD” program is set, the
machine will execute fuzzy detectio n. The
computer will set the water level and wash
time as per the cloth and quantity of the
laundries. The whole procedur e is under
automatic control.
SOFT Washing the woollen texti les
QUICK Posthaste wash of the laundry und er 2.0
kg with light soil.
The water level will automatically set 38L .
WASH Just run the washing cycle without
drainage cycle. The detergent was left
inside the drum and can be recycled.
RINSE Remove the left detergent from the clothes
and then rinse the clothes
SPIN When the clothes are washed or the
clothes are quite wet, extra spin is needed.
TUB DRY The purpose is drying the inner t ub and
the outer tub, which can avoid growing
After the power is switched on,pre ss it to start
the machine.
During working, push it to pause.
During pause, push this button to restar t
and go on working
Push the On/Off button to switch on t he
power.
When the power is on, push it again to
switch off the power. Push the
On/Off button to switch on the p ower.
If the start/pause button is n ot pushed, the
washing machine will automatically s witch
off the power after 5 minutes.
The digitron displays the time remained
(in minute) before the washing is fi nished.
Push down the reserve button. The res erve
indicator light is on the digitron di splays the
reserve time of fi nishing washing (in hour).
When the machine is started, the reser ve
indicator light is on, indicating t hat the
reserve function is running.
66L 72L
54L 60L
38L 46L
20L 29L
The washing machine can detect the
laundries automatically during A fter detection,
it will set the water level to suitable value
among 46L 60L 72L automatically during the
STANDARD program.
The water level decided may be different f rom
actual value because of the differ ent moisture
level of the laundries.
You can also set water level by yourself. After
the machine is started, it will not s et water
level automatically. You shall push the
start/pause button to make new se tting.
If there’s water inside the tub, the machine
cannot detect the laundries and wi ll display
water level 60L.If wet laundries are put in, it
may display water level 72L. You must set
suitable water level by yourself.
If quick program is selected, it will display
water level 38L.
If tub dry program is selected, th e water
level will not respond.
During operation of wash and rinse p rogram,
you can push down the waterlevel button to
add water. When you release the button, or it
reaches the overfl ow water level, the machine
will stop adding water.