12
Push “ ” button to switch on the powerPush “ ” button, select suitable water levelPush “ ” button to select suitable reserve wash programPush “ ” button to select suitable automatic program
After the power is switched on, “SOAK ” is automatically set. To select other fully-auto
program, please push the “PROGRAM ” button till the correspondin g indicator is on.
Refer to the “Program” button on Page 11.
When the “soak” is selected, after th e water start to jet, the program wash, rins e and
spin will be implemented (low water level soak for 25 minutes,mid level 35 mins hi gh
level 45 mins)
Push PROGRAM button for 8 times,and it wi ll resume the intial mode.It will circulate
sequence.
Water pressure and water level infl uence the wash time.
Even there’s no water in the tub, the spinning will start afte r a certain period.
Wash and spin after putting the damageable clot hes into tuck net, to avoid scathe.
Wash the laundries that are prone to lose colors separately fro m other laundries.
When washing start or opening cover intermit ting, the washing machine will begin to
work after a period time, this is norma l phenomenon.
Only select RINSE program,If there’s water inside the tub, t he machine will spin before
rinsing, If there’s no water the machine will rinse direc tly.
After switching on the power, the washing machine will execute fuzzy program
automatically to detect the cloth during the standard program. After defection, it can set
the water level automatically. To select other water level, fi rst push the “START/PAUSE”
button, then push the “ WATER LEVEL ” button to set the water level.
The pulsator will not rotate unless the water is fi lled to selected water level.
After switching on the power, the reserve program is set to off mode automatically. If you
need to set the washing procedure to be fi nished at reserved time, please push the
“RESERVE ” button to set the reserve wash program. Refer to reserve button in Page 11
for selection.
Confi rm the operation of reserve program
When the “RESERVE” function is activated, the indicator light of
the program you have set will be off. The “RESERVE (HOURS)” and
“REMAIN MINUTES” indicator lights will be on. During reserve
procedure, push the “RESERVE” button to display the reserve mode.
To change the running program or cancel the reserve setting, you
need to switch off the power and make new selection.
1
3
4
2
Push “ ” button, close the top lidFinish washing
If the top cover is opened when the machine is spinning, the machine will stop running
and alarm.
After Finishing washing, it will switch off power automatically.
5
6