How to change the direction of the drain hose
1.Please lean the washing maching gently down on soft items(like the towel cloth,blanket,etc.) 2.Remove the Drain hose from the fixing clamp of the base frame.
3.Fix the drain hose in the fixing clamp on the other side. 4.Lift the maching up gently.
Remark: In order to make sure of the correct of installation, it is suggested to change the direction of the drain hose with our company serviceman.
The drain hose shall drain smoothly.
1.The height of the drain hose shall be less than 10cm , or the drainage will not be smooth, and cost such long time that the machine may stop at mid way.
2.Do not trample or press the drain hose.
3.If the drain hose is too long, cut it at mid point. To make smooth drainage,cut the front end of the hose slantingly.
4.If extra drain hose is needed,please make separate purchase.The inner diameter of the extra hose shall not less than 30mm, and the length shall not exceed 1.5m.
5.If the extra hose is too long,cut it either at A or at B point.
8
