Phenomena
The spinning is intermittent when it starts.
Push the “spin” button to select “Spin”, but it doesn’t work.
The final spinning is finished, it becomes rinsing and begins to inlet water.
When the power plug is inserted,computer board indicator is switched on, and the machine starts working.
Explanation
Balance the laundries to avoid slanting.
The program is setting the drain time. Some time is needed before it starts spinning.
Because the washing clothes lean to one side,the safety switch acts.After water filling and running, eliminating the eccentricity of washing clothes,then beginning to spin.
It is the special resume function. In the case of power failure or the power plug is loose during washing, the machine can save the running program, and resume the program afterthe power supply is recobered. You do not need to set the program again
Specification
Rated voltage/Frequency | |
|
|
Water level / Water quantity (about) | 1/20L, 2/29L, 3/38L, 4/46L, 5/54L, 6/60L, 7/66L,8/72L |
|
|
Injection pressure | 0.03 MPa ~ 1.0 MPa |
|
|
Washing/Spinning capacity | 8.5kg/8.5kg |
|
|
15
