Temperature
■Press the TEMP/TIME up arrow button to raise the temperature. Each time you press or hold the TEMP/TIME up arrow button, the temperature will go up 1ºF until it reaches 86°F (30°C).
NOTE: After 5 seconds, the display will show the current room temperature.
■Press the TEMP/TIME down arrow button to lower the temperature. Each time you press or hold the TEMP/TIME down arrow button, the temperature will go down 1ºF until it reaches 61°F (16°C).
NOTE: After 5 seconds, the display will show the current room temperature.
Timer Delay
To set the Timer for a
1.Press TIMER. Timer On indicator light will flash. Display will show remaining hours before the air conditioner will turn off.
2.Press the TEMP/TIME up or down arrow button to change the delay time from 1 hour to 24 hours.
3.After 5 seconds, Timer On indicator light will remain on. Display will show the current room temperature.
To set the Timer to turn on the air conditioner, keeping previous settings:
1.Turn on the air conditioner.
2.Press TIMER. Timer On indicator light will flash. Display will show remaining hours before the air conditioner will turn on.
3.Press the TEMP/TIME up or down arrow button to change the delay time from 1 hour to 24 hours.
4.After 5 seconds, Timer On indicator light will remain on. Display will show the current room temperature.
To set the Timer to turn on the air conditioner, changing the previous settings:
1.Turn on the air conditioner.
2.Adjust the mode to Fan, Cool, Energy Saver or Dehum.
3.For Fan, Cool or Energy Saver mode, adjust the fan speed to High, Med or Low.
NOTE: In Dehum mode, the Speed button will not operate.
4.Adjust the temperature between 61ºF and 86ºF (16ºC and 30ºC).
NOTE: In Fan mode, the temperature cannot be set.
5.Wait 3 seconds before turning off the air conditioner.
6.Press TIMER. Timer On indicator light will flash. Display will show remaining hours before the air conditioner will turn on.
7.Press the TEMP/TIME up or down arrow button to change the delay time from 1 hour to 24 hours.
8.After 5 seconds, Timer On indicator light will remain on. Dis- play will show the current room temperature.
To clear Timer delay program:
NOTE: Air conditioner can be either on or off.
1.Press TIMER once after it has been programmed. Display will show remaining time.
2.While the display is showing the remaining time, press TIMER again. Timer Off indicator light will turn on.
To see or change the remaining time (in hours):
1.Press TIMER once after it has been programmed. Display will show remaining time.
2.While the display is showing the remaining time, press the up or down TEMP/TIME button to increase or decrease the time.
3.After 5 seconds, the display will show the current room temperature.
10
