Haier 0010518358, HWR06XCJ manual PositionAirConditioner, B A C, Attach Side Curtains to Window

PositionAirConditioner

3.Slide the side bracket over the screw.

4.Tighten the screw. The side bracket should be resting on the windowsill.

NOTES:

■Handle the air conditioner gently.

■Be sure your air conditioner does not fall out of the opening during installation or removal.

■The place where the power cord exits the air conditioner should be no more than 6 ft (183 cm) from a grounded outlet.

■Do not block the louvers in the front panel.

■Do not block the louvers on the outside of the air conditioner.

1.Center the air conditioner in the window. Lower the window sash behind the top channel to hold the cabinet in place

NOTE: Your model may differ from the one shown.

5.Use ¹⁄₈” drill bit to drill a starter hole through the holes in the side bracket and windowsill.

6.Using two ³¹⁄₃₂” screws, attach the side bracket to the windowsill.

B

A

C

A. Side curtain against window channel

B. Window sash behind top channel

C. Bottom channel in behind windowsill

2.Loosen the screw on the right-hand side of the air conditioner cabinet near the bottom.

7.Repeat for side bracket installation on the left-hand side of the air conditioner.

Attach Side Curtains to Window

1.Pull the left-hand curtain out until it fits into the window channel.

2.Use a ¹⁄₈” drill bit to drill a starter hole through the top hole in the side curtain and into the window sash.

3.Insert one of the ³¹⁄₃₂” screws through the top hole of the lefthand curtain and into the window sash.

4.Repeat for the right-hand curtain.

7