About your LED LCD TV
Preparation of Your | Do not throw away the battery with common domestic |
Remote Control
Battery Installation
according to local regulation.
Getting Started
Setting up
Place the remote control face down, then open the cover of the battery compartment.
Install two AAA batteries. (The + and - symbol of the battery must match with the marks on the remote).
Close the cover of the battery compartment.
Location
You will need to place your TV near your plug socket
(so the power cable can comfortably reach) and within reach of your aerial socket or extension lead.
Connection
Insert your TV aerial lead into the Antenna input at the side of the TV.
Insert the batteries into the remote control. Make sure they are inserted the right way around, matching the polarity as indicated inside the battery compartment.
Battery Caution
Confirm there is no object between the remote control and the remote sensor of the TV set.
Sunshine or other strong light will interfere with the signal sent by the remote control.Avoid using nearby
Do not put the remote control in direct heat or in a damp place as you may damage the remote.
Please use two AAA 1.5V batteries. Do not mix battery types. Install the batteries at the correct polarities. Do not use rechargeable batteries. If your TV is to be stored for a period of time, remove the batteries from the remote control.
Switching Your TV On
Press the POWER button on the right of the TV once. A indicator light will appear in the right of the screen.
Press POWER on the remote control. The TV will turn on. This may take a few moments, and this display will appear on the screen when the TV is turned on for the first time.
Press OK button on the remote control to enter the Backlight Mode menu.
