Haier LET46Z18HF, LET42T1000HF, LET39Z18HF, LET32T1000HF instruction manual Troubleshooting

Reference Section

Reference Sections		Disconnect the television from
		power supply and 10 seconds
	Television out	later, connect the television
		to the power supply. If the
Troubleshooting	of control
		problem still exists, contact
		authorized after-sales service
			En
To assist in location of possible faults use the		for technical assistance.
help guide below:	Note

	Verify if the television is
No picture, no	properly plugged in.
	Verify if the television has a
sound
	proper supplied power source.
	Verify if electricity is available.
	Verify if correct signals are
	input.
Blank screen	Operate the remote to change
	signal input to correct input.
	Restart the television if power
	supply is interrupted.
	Press MUTE button and verify if
	Mute mode is set.
	Switch to other channel and
No sound	verify if the same problem
	happens.
	Press VOL+ button to see if the
	problem can be solved.
	Verify if sound system is correct.
Poor sound	Refer to user‘s manual for
	adjustment.
No picture in	Verify if correct channel is
	selected.
some channel
	Adjust the antenna.
	Verify if the same problem exists
No color for	in other channels.
some channel	Check out of picture and sound
program	systems.
(black and	Refer to relative instructions
white)	in the Manual for color
	adjustment.
	Verify if the antenna is correctly
Spots with	connected.
	Verify if the antenna is in good
some or all
	condition.
pictures
	Make fine adjustment of
	channel.

If the fault can not be repaired using the above guide consult with your local authorized service centre.

The TV set must only be repaired by a qualified registered service person. Never attempt to remove the back cover as the TV set has dangerous voltages

Digital LED LCD Television Instruction Manual EN-26