External Equipment Connections
PC connection
How to connect
1. To get the best picture quality, adjust the PC graphics card to(>1024 x768),60Hz.
2. Use the TV`s VGA IN port for video connections, depending onyour PC connector. 
If the graphic card on the PC does not output analog and digitalRGB simultaneously, connect only one ofeitherVGA IN to display thePC on the TV.
If the graphic card on the PC does output analog and digital RGB simultaneously, set the TV to either VGA ; (the other mode is set to Plug and Play automaticallyby the TV.)
3. Then, make the corresponding audio connection. If using a sound card, adjust the PC sound as required.
How to use
1. Turnon the PCand the TV.
2. Turn on the display by pressing the POWER button on theTV's remote control.
3. Use TV/AV on the remotecontrol to select PC.
or DVI source.
4. Check the image on your TV. There may be noise associated with the resolution, vertical pattern, contrast or brightness in PC mode. If noise is present, change the PC mode to another resolution, change the refresh rate to another rate or adjust the brightness and contrast on the menu until the picture is clear. If the refresh rate of the PCgraphic card cannot be changed, change the PC graphic card or consult the manufacturer of thePC graphic card.
NOTES:
1Use a VGAcable.
2Avoid keeping a fixed image on the TV's screen for a long period of time. The fixed
i m a g e m a y b e c o m e p e r m a n e n t l y imprinted on thescreen.
3 The synchronization input form for Horizontal and Vertical frequencies is separate.
|
|
| VGA IN |
L | R |
|
|
AUDIO OUT | VGA | AUDIO | |
Resolution
Mode | Resolution | Line | Frame |
frequency | frequency | ||
|
| (Khz) | (Hz) |
|
|
|
|
VGA | 640*480 | 31.5KHz | 60Hz |
|
|
|
|
SVGA | 800*600 | 37.9KHz | 60Hz |
|
|
|
|
XGA | 1024*768 | 48.4KHz | 60Hz |
|
|
|
|
