Haier PBFS21 Preparation before Use, Usage, Dismantle all subassemblies, 1Turn on the power

Models: RBFS21 PBFS21

1 29
Download 29 pages 24.87 Kb
Page 10
Image 10
Preparation before Use

Preparation before Use

1. Dismantle all subassemblies

The foam base seat as well as the adhesive WDSHDVD¿[HGDGGLWLRQDOSDUWPXVWEHDOVR

dismantled.

3.Place the refrigerator at a proper position

(See the previous “Position Environment”

2.Check all the additional parts and materials with the machine.

7KHDUWLFOHVLQWKHER[PXVWEHFKHFNHGDFFRUGLQJWRWKHGHVFULSWLRQV on the incasement list, and if there is any difference between the description on the incasement list and the actual case, please consult the seller shop for information.

4.The installment of the decorating articles at the base.

Open the door of the refrigerant room and from the refrigerant room take out the decorating articles and install them at the proper positions, and drill the bolts.

For the convenience of searching information, the number of the refrigerator and the

1. Dismantle all subassemblies number of manufacturing should be copied on the guarantee issue. Note

7.It is recommended that before being used the

UHIULJHUDWRUVKRXOGEHFOHDQHG¿UVW

Before putting food into the refrigerator, please clean the inside and outside of the refrigerator completely using the baking soda diluted by water (by the ratio of 4L water to a spoon of baking soda).

8.Place the refrigerator without turning on the power.

$IWHUWKHUHIULJHUDWRULVSODFHGDWDÀDWSRVLWLRQDQG cleaned, don’t turn on the power immediately, rather you should place the refrigerator for about 6 hours without turning on the power. After at least 6 hours, turn on the power so that the refrigerator can operate well.

Usage

1Turn on the power

After turning on the power, the chill-cold storage temperature, the deepfreeze refrigeration temperature will be automatically four levels, and the default value of time is 12:00, and the door body vision board is in the state of unlocking.

2The operation of the refrigerator

Adjusting way with hands: you may press the temperature adjusting button to design for the operation of the refrigerator (see the following “Instruction of Functions”).

3. Put the food into the refrigerator

The refrigerator will be cooled completely after a period of being powered on and operates for a period of time, and then the foods can

be put into the refrigerator and the refrigerator is used normally.

After the temperature is changed, a EDODQFHRIWKHLQER[WHPSHUDWXUHVDQ only be achieved after a period of time.

And the length of this period of time

3.Place the refrigerator at a proper position depends on the degree of the change NOTE of the temperature, the ambient temperature, and frequency of opening the door, and the amount of stored

food in the refrigerator, and so on.

9

Page 10
Image 10
Haier PBFS21 Preparation before Use, Usage, Dismantle all subassemblies, Place the refrigerator at a proper position