Removing and Installings the Doors
Before the door body installment and dismantlement, please take out the food on the door body rack, dismantle the bottle seat, and then cut the refrigerator off, turn off the water source, in case a life injury, product loss or property loss may be caused.
During the door body installment and dismantlement, please ask two or more special persons Note carry out the following operations in case of the possibility of life injury or r product loss or
property loss.
Chill-cold storage Right Door Body Installment and Dismantlement
1.Dismantle the bolts on decorating articles of the refrigerator body, and then take decorating articles off the refrigerator body.
2.Please dismantle the bolts using a screwdriver, and take the up gemel, and then take the refrigerant door body off and place it at a proper position.
3.Please dismantle the middle gemel if needed.
4.Install the refrigerant door body in a direction that is converse to the above direction.
Note
When lifting up the gemel and making it separated from the door body, please prevent the door body slanting forwards.
Chill-cold storage Left Door Body Installment and Dismantlement
)LUVWFDUU\RXWWKH¿UVWVWHSRIWKHFKLOO | 2.Cut the power line connecting off and cut the water pipe connecting, |
cold storage door body installment and | dismantle the bolts using a screwdriver, and take the up gemel, and then |
dismantlement. | take the deepfreeze refrigeration door body off and place it at a proper |
| position.(Only for PBFS21EDAW/B/V/S) |
5