Haier WL22T1 S-VIDEO Input, Connection Instructions, Component Input ports, Connection Option

Connection Instructions

COMPONENT (If connected to SVIDEO,select the SV external input source.)

3.Refer to the DVD player's manual for operating instructions.

Component Input ports

To get better picture quality, connect a DVD player to the component input ports as shown below.

Y Pb Pr

S-VIDEO Input

-To avoid picture noise (interference), leave an adequate distance between the VCR and TV

Connection and use steps:

1.Read the user guide supplied with your AV devices and ensure that it has S-Video connectors;

2.Make sure that the power of the LCD-TV and the AV device are off;

Connection Option 1

Set VCR output switch to 3 or 4 and then tune TV to the same channel number.

Connection Option 2

1.Connect the audio and Svideo cables from the VCR's output jacks to the TV input jacks, as shown in the figure.

2.Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner s manual.)

3.Turn on the power of the LCD-TV first ; and then turn on the power of the AV device;

4.Press the TV/AV button to set the video input mode of the LCD-TV to S-VIDEO mode .

2

1

VCR