OPERATION INSTRUCTIONS
C.Dish washing
1.Switch on the appliance.
Press the On/Off switch and the indicators for drying and stan- dard wash illuminate.
2.Program selection
Select proper program . The program indicator lights in 5 sec- onds and the wash process starts.
3.End of wash.
Caution
Turn the tap off at the end of washing program to prevent water leakage due
Forbidden to high pressure.
Poorer cleanness
1.Do not let food containers lapped.
If too many food containers are put in, the lapped parts can not be washed. If it is necessary to lap the containers, make sure that water can spray direct to the inside of the containers.
2.Yellow or balck spots on food containers
When yellow or black spots are seen on food cantainers, it means that more iron in the containers.
3.Check the following items:
1)Chopsticks and forks that protrude out too long will prevent the spray from turning. If so, please rearrange them.
2)When the filter or the sprayer is blocked, clean them, please.
3)Please use special detergent.
4)Do not cover the washing container with food containers.
5)Remove hard matters adhering to the food containers.
The follows are not abnormal.
1.Water remains in the washing box.
After water is drained out, a certain amount of water remains under the filter. The water will be drained out first in next operation.
remained water
1)When a program with drying process is selected, the program indicator stays on and the indicator for drying blinks. The buzzer buzzes at the end of the drying process and the power switch is turned off automatically.
2)When a program without drying process is selected, the buzzer buzzes and the power switch is turned off automatically when the program finishes.
4.Food containers drying
1)After washing is finished and the power switch is switched off, open the door. Food containers will be dry in several minutes.
2.Water remains under the filter
Water or water drops often remain under the filter after opera- tion due to different forms and different settings of food containers.
3.Watermarks on cups
Watermarks ramaining on the surface of transparent glasses is not because of uncompleted flushing out of detergent. The rea- son is that the water contains mineral substance. Clean the watermarks with a piece of cloth.
GB | KNMK |
