MAINTENANCE
Daily Maintenance
1.Take out the filter after draining is finished, and the washing box is cooled.
2.Remove residues on the filter. Then, wash and clean it.
1.Clean the sprayer
1)Remove the card and seal. Method of removing the sprayer:
Wearing ring (black)
3.Mount the filter back after the water on it is dried.
Weekly Maintenance
Warning
Do not flush the dishwasher directly with
water. Otherwise, it will cause shot circuit, Forbidden electric shock, rust and faults.
Do not touch plug and electric parts or
Sprayer
Card
Seal
Sprayer
Seal
Card
Wearing ring (black)
operate the power switch with wet hands Forbidden to avoid electric shock.
2)After the sprayer is taken off, wash out the adhered matters completely.
Warning
Check the power plug and the socket for dust periodically.The plug shall be inserted com-
pletely into the socket. If there is dust on it,
Caution
connection is not completely. That may cause electric shock or fire.
Cleaning should be done only after draining
and cooling of the washing box. Otherwise, Caution you may get
| Caution |
|
|
| If the unit will not be used in a week or more, |
| take off the power plug for safety. |
take off | Dust adhering to the plug or the socket may |
the plug | cause overheat or fire. |
When cleaning or conducting maintenance, switch off the power switch and take off the plug. Otherwise, if water enters the unit
take off accidentally, it may cause electric shock or the plug burn.
3)Reassemble it after washing
Do not forget to install the seal (white) on the sprayer. If you forget it, the sprayer can not rotate smoothly, that will reduce its capacity.
Installation method of the sprayer:
4)After installation, rotate the sprayer with a hand gently. Make sure the installation is correct.
KNNK | GB |
