Haier XQGH70-B1266

Displayed

code Code paraphrase Troubleshooting methods

The washing machine is in automatic weighting

condition

Normal prompt

Level codes of washing quantities for dryer

Shut down of the washing machine

Not meet door opening condition, not allow to

unlock the door lock

Children lock prompt

All procedures end

Normal prompt

Check whether the drain pipe is blocked or bent and clean

the drain filer

Re-close the door of the washing machine. Re-lock the

door after the “Start” key is pressed

Check whether the faucet is opened, the water pressure is too low or

water is cut off. Eliminate it by pressing the “Start/Pause” key. If the

phenomenon still continues, please contact the maintenance

department

Check the adjustable feet and whether the washing machine is steady;

take clothes out and scatter and equally distribute them; if the

phenomenon still continues, please contact the maintenance

department.

Drainage fault

Abnormal locking of the door lock

Abnormal water inflowing

Unequal distribution during dehydration

If the following alarm icons appear, press the “Power” key to shut down the machine for eliminating them; and if they still

appear, unplug the power plug and contact the agency or the manufacturer.

Full-automatic Washing Machine.

Diagrams in this manual are diagrammatic drawings. The appearances and colors of the

product and its parts may be different from those shown in the diagrammatic drawings of

this manual owing to product’s improvement and series expansion, please subject to

material object. Apologize for this.

This machine belongs to class-I appliance, please ensure electrical safety when you use

it.

Please read the manual carefully before using this machine.

Please read carefully safety cautions in the next page that you can safely and correctly

use it.

Level codes of washing quantities for washer