Samsung GH68_3XXXXA Set up and manage wireless access points, IP Internet Protocol settings

Wi-Fi settings

Set up and manage wireless access points.

1.From the Settings menu, touch Wireless and networks ➔ Wi-Fi settings. The following settings are available:

•Wi-Fi: Touch to enable your phone’s Wi-Fi service.

•Network notification: When enabled, notifies you when an open Wi-Fi network is available.

•WPS button connection: Configure new wireless networks automatically.

2.Swipe up to Wi-Fi networks. The following options are available:

•Touch a Wi-Fi network to connect to, disconnect from, or Forget the network.

•Add Wi-Fi network: Manually add a new Wi-Fi connection.

3.Touch Menu. The following options are available:

•Scan: Touch to search for available Wi-Fi access points. Search results are listed in Wi-Fi networks.

•Advanced: See “Advanced Wi-Fi settings” on page 120.

Advanced Wi-Fi settings

▶From the Settings menu, touch Wireless and networks ➔ Wi-Fi settings ➔ Advanced.

•Wi-Fi sleep policy: Specify when to switch from Wi-Fi to mobile data for data communications. Touch to choose from When screen turns off, Never when plugged in, or Never.

•MAC address: View your phone’s MAC address, needed for connecting to some secured networks (not configurable).

•Proxy: Touch to enter a proxy number.

•Port: Touch to enter a port number.

•IP address: Shows the Internet Protocol address assigned to this device.

•IP (Internet Protocol) settings:

–Use static IP: Touch to use a static IP address. When enabled, a check mark appears in the check box.

–IP address: When using a static IP, enter the static IP address.

–Gateway: When using a static IP, enter the Gateway.

–Netmask: When using a static IP, enter the Netmask.

–DNS 1: When using a static IP, enter the DNS 1 value.

–DNS 2: When using a static IP, enter the DNS 2 value.

120