Continuous Processing
(available on selected models)
Please see the Easy to Use
Assembly Guide on page 5.)
Continuous processing allows food to be processed in a separate bowl when processing large quantities.
IMPORTANT: For continuous process- ing, insert food gate into slot of lid and make sure the continuous feed disc is in place.
1.Make sure the Control Switch is turned to OFF and the unit is unplugged.
2.Lock the bowl onto base. (See “How to Lock the Bowl” on page 6.)
3.Put disc shaft onto motor shaft.
4. Place the continuous feed disc, ribbed side up, onto the disc shaft. Turn the disc slowly until it drops into position (level with top of bowl).
Continuous
Feed Disc
Motor
Shaft
5.Select desired side of reversible slicing/shredding disc and place that side up on the disc shaft.
Slicer/Shredder
Disc
Motor
Shaft
6.INSERT FOOD GATE WITH SHORT SIDE DOWN INTO SLOT OF LID.
7.Lock on cover. (See “How to Lock the Cover” on page 7.) Place bowl under feed chute.
8.Plug in unit and select speed. Process food. Check the continuous feed chute frequently to make sure the opening is not blocked. If blocked, turn unit off and unplug. Clear blockage, then reassemble and continue processing.
NOTE: When using the continuous feed chute, some food may fall into the food processor bowl.
Hint!
Do not use the continuous feed chute feature to slice meats or cheeses or when shredding root vegetables (carrots, potatoes, etc.). As with most continuous feed processors, shredded moist vegetables may clog in the chute. It is best to shred these vegetables into the food processor bowl. Slicing these root vegetables while using the continu- ous feed chute will not present a problem.
9
