Hamilton Electronics A 6436 IBS PACKAGE ONE - MAS S 6032 TS MAS, Mas Compliance Requirements

ATTENTION PLUMBING CONTRACTOR!!!

PACKAGE ONE - MAS S 6032 TS MAS

No modifications accepted (Packaged units only)

MAS COMPLIANCE REQUIREMENTS

For MAS compliance installed accessories must include: Removable seat at head end, two peened horizontal grab bars on the back wall, pressure balancing mixing valve, hand held shower with 30” slide bar, vacuum breaker and 60” hose. Unit and accessories must be installed per MAS and Praxis guidlines.

FRAMING DIMENSIONS					STANDARD FEATURES	STANDARD CODES
					Durable acrylic finish	ANSI Z124.1
	A	B	C	D
	6014”	33”	14 34”	1814”	One piece design	ASTM F463
					Accessory shelves	ASTM E84
6” x 6” minimum opening
						SBCCI
	in floor for drain				Removable seat	NAHB
		connection			Stainless steel grab bars	UPC
					Stainless steel curtain rod

MASSACHUSETTS ARCHITECTURAL ACCESS BOARD

MAS

(when fully equipped)

Unit configured with standard features, pressure balanced control valve and hand held shower package.

Confirm any requested loose accessories desired by circling the items on page one.

Submittal drawing required for Prepackaged model. NO MODIFICATIONS ACCEPTED.

All built to order model configurations and submittal drawings must be ordered.

UPC/SKU NUMBERS Left Hand Valve: Right Hand Valve:

THIS ORDER WILL NOT BE PROCESSED UNLESS THIS

DOCUMENT IS SIGNED, DATED AND A CONTACT PHONE NUMBER OF THE PLUMBING CONTRACTOR IS PROVIDED.

Signed: CONTRACTOR Date: Contact Phone Number: CONTRACTOR

Customer Service: (800)-443-7269 Fax: (731)-925-0379