Hamilton Electronics A 6436 IBS PACKAGE ONE - MAS G 3260 TS IBS MAS, Mas Compliance Requirements

ATTENTION PLUMBING CONTRACTOR!!!

PACKAGE ONE - MAS G 3260 TS IBS MAS

No modifications accepted (Packaged units only)

MAS COMPLIANCE REQUIREMENTS

For MAS compliance installed accessories must include: Removable seat at head end, two peened horizontal grab bars on the back wall, pressure balancing mixing valve, hand held shower with 30” slide bar, vacuum breaker and 60” hose. Unit and accessories must be installed per MAS and Praxis guidlines.

FRAMING DIMENSIONS

A1” B C D3” 604 3283” 1558” 16 4

6” x 6” minimum opening

in floor for drain

connection

STANDARD FEATURES

High gloss gelcoat finish One piece design Tri-fold Removable seat Stainless steel grab bars

STANDARD CODES

ANSI Z124.1

ASTM F463

ASTM E84

SBCCI

NAHB

UPC

MASSACHUSETTS ARCHITECTURAL ACCESS BOARD

MAS

(when fully equipped)

Unit configured with standard features, pressure balanced control valve and hand held shower package.

Confirm any requested loose accessories desired by circling the items on page one.

Submittal drawing required for Prepackaged model. NO MODIFICATIONS ACCEPTED.

All built to order model configurations and submittal drawings must be ordered.

UPC/SKU NUMBERS Left Hand Valve: Right Hand Valve:

THIS ORDER WILL NOT BE PROCESSED UNLESS THIS

DOCUMENT IS SIGNED, DATED AND A CONTACT PHONE NUMBER OF THE PLUMBING CONTRACTOR IS PROVIDED.

Signed: CONTRACTOR Date: Contact Phone Number: CONTRACTOR

Customer Service: (800)-443-7269 Fax: (731)-925-0379