Hamilton Electronics A 6436 IBS warranty PACKAGE ONE - TAS/ANSI A 4136 IBS TAS, Signed: CONTRACTOR

ATTENTION PLUMBING CONTRACTOR!!!

PACKAGE ONE - TAS/ANSI A 4136 IBS TAS

No modifications accepted (Packaged units only)

Recessed receiver flange to allow drywall flush to unit. (Optional feature will add 2” to the overall width of the product.)

TAS/ANSI COMPLIANCE REQUIREMENTS

For TAS/ANSI compliance, unit requires return receiver flange to meet open floor space and unobstructed transfer. installed acces- sories must include L-grab bar and vertical S-grab bar, L-shaped fold up seat, pressure balancing mixing valve, hand-held shower with slide bar, vacuum breaker and 60” hose. Unit must be installed so threshold is no more than 1/2” above the finished floor. Unit and accessiories must be installed per TAS/ANSI and Praxis Guidelines.

FRAMING DIMENSIONS					STANDARD FEATURES	STANDARD CODES	TEXAS ACCESSIBILLITY
					Durable cast acrylic finish		TAS
	A*	B	C	D			S NDARD CODE
	4112”	36 14”	18 14”	18”	Low threshold entry	ANSI Z124.2	ICC/ANSI A117.1
					Corner accessory shelf	ASTM F463	HUD/ADA
10” Diameter x 1/2” Deep
					Integral dome	ASTM E84	UFAS
Recess Around Drain Core					Molded receiver flange	SBCCI	(when fully equipped)
Unit must be installed into					HDPE fold up seat	NAHB	Unit configured with standard
a recessed pit -or- build up					Stainless steel grab bars	UPC	features, pressure balanced
finished floor to comply with							control valve and hand held
TAS threshold guidelines.					Stainless steel curtain rod		shower package.
	Confirm any requested loose accessories desired by circling the items on page one.
	Submittal drawing required for Prepackaged model. NO MODIFICATIONS ACCEPTED.
	All built to order model configurations and submittal drawings must be ordered.
	UPC/SKU NUMBERS				Left Hand Valve:	Right Hand Valve:
	*With optional recess receiver flange, a 2”

This model included in the PRAXIS QUALITY INSTALLATION ASSURANCE PROGRAM.

Important installation procedures MUST be followed for the fixture to be granted a warranty.

THIS ORDER WILL NOT BE PROCESSED UNLESS THIS DOCUMENT IS SIGNED, DATED AND A CONTACT PHONE NUMBER OF THE PLUMBING CONTRACTOR IS PROVIDED. FOR ORDERS OF FOUR OR MORE UNITS, PARTICIPATION IN THE PRAXIS QUALITY INSTALLATION ASSURANCE PROGRAM IS MANDATORY FOR ACTIVATION OF PRODUCT WARRANTY.

Signed: CONTRACTOR	Date:	Contact Phone Number:	CONTRACTOR
Praxis Quality Installation Assurance Program Information: Phone: (800)-759-7744 ext: 29.
Customer Service: (800)-443-7269		Fax: (731)-925-0379