PACKAGE ONE - MAS G 6233 IBS MAS
No modifications accepted (Packaged units only)
MAS COMPLIANCE REQUIREMENTS
For MAS compliance with seat: Installed accessories must include:
FRAMING DIMENSIONS | STANDARD FEATURES | STANDARD CODES | MASSACHUSETTS |
| |||||
|
|
|
|
|
| High gloss gelcoat finish | ANSI Z124.2 | ARCHITECTURAL |
|
| A | B | C | D |
| ||||
|
| ACCESS BOARD |
| ||||||
| 6241” | 33” | 17” | 16” |
|
| |||
|
| Low threshold entry | ASTM F463 | MAS |
| ||||
10” Diameter x 1/2” Deep | Molded soap dishes | ASTM E84 | (when fully equipped) |
| |||||
Recess Around Drain Core | Padded fold up seat | SBCCI |
| ||||||
Unit must be installed into | Stainless steel grab bar | NAHB | Unit configured with standard |
| |||||
a recessed pit | UPC | features, pressure balanced |
| ||||||
finished floor to comply with |
| control valve and hand held |
| ||||||
MAS threshold guidelines. |
|
| shower package. |
| |||||
| Confirm any requested loose accessories desired | by circling the items on page one. |
| ||||||
| Submittal drawing required for Prepackaged model. NO MODIFICATIONS ACCEPTED. | ||||||||
| All built to order model configurations and submittal drawings must be ordered. | ||||||||
UPC/SKU NUMBERS | Left Hand Valve: | Right Hand Valve: |
This model included in the PRAXIS QUALITY INSTALLATION ASSURANCE PROGRAM.
Important installation procedures MUST be followed for the fixture to be granted a warranty.
THIS ORDER WILL NOT BE PROCESSED UNLESS THIS DOCUMENT IS SIGNED, DATED AND A CONTACT PHONE NUMBER OF THE PLUMBING CONTRACTOR IS PROVIDED. FOR ORDERS OF FOUR OR MORE UNITS, PARTICIPATION IN THE PRAXIS QUALITY INSTALLATION ASSURANCE PROGRAM IS MANDATORY FOR ACTIVATION OF PRODUCT WARRANTY.
Signed: CONTRACTOR | Date: | Contact Phone Number: | CONTRACTOR |
Praxis Quality Installation Assurance Program Information: Phone: | |||
Customer Service: | Fax: |
|