PACKAGE ONE - ADA/ANSI/TAS G 3260 TS IBS
ATTENTION PLUMBING CONTRACTOR!!!

PACKAGE ONE - ADA/ANSI/TAS G 3260 TS IBS

No modifications accepted (Packaged units only)

ADA/TAS COMPLIANCE REQUIREMENTS

For ADA/TAS compliance: seat securely mounted at head end, one horizontal grab bar mounted on the valve wall, two horizontal grab bars mounted on the back wall, one horizontal grab bar mounted on the head wall and one vertical grab bar mounted on the valve wall near the entry. Pressure balancing mixing valve, hand held shower with slide bar, vacuum breaker and 60” hose. Unit and accessories must be installed per ADA/TAS and Praxis guidlines.

FRAMING DIMENSIONS

A1B C D3604 3283155816 4

6” x 6” minimum opening

in floor for drain

connection

STANDARD FEATURES

High gloss gelcoat finish One piece design Phenolic fold up seat Stainless steel grab bars

STANDARD CODES

ANSI Z124.1

ASTM F463

ASTM E84

SBCCI

NAHB

UPC

ADA/ANCODES

ICC SI A117.1 HUD/ADA UFAS

TAS

(when fully equipped)

Unit configured with standard features, pressure balanced control valve and hand held shower package.

Confirm any requested loose accessories desired by circling the items on page one.

Submittal drawing required for Prepackaged model. NO MODIFICATIONS ACCEPTED.

All built to order model configurations and submittal drawings must be ordered.

UPC/SKU NUMBERS Left Hand Valve:

 

Right Hand Valve:

 

 

 

 

THIS ORDER WILL NOT BE PROCESSED UNLESS THIS

DOCUMENT IS SIGNED, DATED AND A CONTACT PHONE NUMBER OF THE PLUMBING CONTRACTOR IS PROVIDED.

Signed: CONTRACTOR Date:

Contact Phone Number: CONTRACTOR

Customer Service: (800)-443-7269 Fax: (731)-925-0379

Page 22
Image 22
Hamilton Electronics A 6436 IBS PACKAGE ONE - ADA/ANSI/TAS G 3260 TS IBS, No modifications accepted Packaged units only