Hand Held Products 3820 Good Read Delay, Number of Beeps – Good Read, User-SpecifiedGood Read Delay, *No Delay, Short Delay (500 ms), Long Delay (1500 ms), Medium Delay (1000 ms)

Number of Beeps – Good Read

The number of beeps of a good read can be programmed from 1 - 9. The same number of beeps will be applied to the beeper and LED in response to a good read. For example, if you program this option to have five beeps, there will be five beeps and five LED flashes in response to a good read. The beeps and LED flashes are in sync with one another. To change the number of beeps, scan the bar code below and then scan a digit (1-9) bar code and the Save bar code on the Programming Chart inside the back cover of this manual. Default = One.

Number of Beeps/LED FlashesGood Read Delay

This sets the minimum amount of time before the scanner can read another bar code. Default = 0 ms (No Delay.)

*No DelayShort Delay (500 ms)Medium Delay (1000 ms)Long Delay (1500 ms)User-Specified Good Read Delay

If you want to set your own length for the good read delay, scan the bar code below, then set the delay (from 0-30,000 milliseconds) by scanning digits from the inside back cover, then scanning Save.

User-Specified Good Read Delay

2020/3820 User’s Guide 3 - 3