Hand Held Products 3820 Code 39, continued, Code 39 Message Length, Code 39 Check Character, No Check Character, Validate and Transmit, Validate, but Don’t Transmit

Code 39, continuedCode 39 Check Character

No Check Character indicates that the scanner reads and transmits bar code data with or without a check character.

When Check Character is set to Validate, but Don’t Transmit, the unit only reads Code 39 bar codes printed with a check character, but will not transmit the check character with the scanned data.

When Check Character is set to Validate and Transmit, the scanner only reads Code 39 bar codes printed with a check character, and will transmit this character at the end of the scanned data. Default = No Check Character.

* No Check Character

Validate, but Don’t Transmit

Validate and Transmit

Code 39 Message Length

Scan the bar codes below to change the message length. Refer to Message Length on page 6-2for additional information. Minimum and Maximum lengths = 0-48. Minimum Default = 0, Maximum Default = 48.

Minimum Message Length

Maximum Message Length

6 - 6 2020/3820 User’s Guide