32
English
3.3 Adjusting Audio Settings
1Press MENU to enter the OSD Main
Menu screen.
2Press / on the remote control or
CHS
/ CHT on the control panel to select
Audio menu.
3Press / OK on the remote control or
INPUT on the control panel to enter the
Audio menu.
4Press / on the remote control or CHS
/ CHT on the control panel to select
an item.
5Press / OK on the remote control or INPUT on the control panel to enter the item.
6Press / on the remote control or VOL+/ VOL- on the control panel to change
the scales or press OK on the remote control or INPUT on the control panel to mark
an item.
7Press RETURN to return to the Audio menu.
8Press MENU to exit the Audio menu.
9The Audio menu can be used to adjust the Audio Mode, Equalizer, Balance, DRC
(DTV only), MTS (ATV only), Auto Volume (ATV only), and Recall settings.
Equalizer is available for adjustment only if you select User in Audio Mode.
•The Audio Mode can be set to Dynamic, Standard, Soft, or User.
•Press / on the remote control or VOL+/ VOL- on the control panel to adjust
the scales in Equalizer and Balance.
•The DRC (Dynamic Range Control) can be set to RF Mode or Line Mode.
•The MTS can be set to Stereo, Mono, or SAP.
•The Recall can be used to reset the original factory settings.
Note:
The items available on the OSD may vary depending on the input signal source.
Picture
Audio
Channel
V-CHIP
Setup
Audio Mode
Equalizer
Balance
MTS
Auto Volume
Recall
ExitReturnEnter
Menu
Move
Return
OK