English

perform this unlock operation, while those electronic equipment modes not so operated still have channel locked up). The indicator light then goes off and setting mode is exited.

4.During the setting process, releasing the electronic equipment button exits the setting mode immediately without changing the status prior to setting.

5.Buttons other than CH+/CH- are not functional during search. Channel buttons include CH+ and CH-.

6.1.6Factory Setting Mode

Factory setting operation procedures are as follows:

1.Press the corresponding electronic equipment button. The indicator light will come on for 2 seconds then it goes off; after 3 seconds, the indicator light will come on again, showing that the setting mode has been entered.

2.While holding the electronic equipment button, first press < (left arrow), then press OK. The indicator then goes off and setting mode is exited, showing factory setting has been restored.

3.During the setting process, releasing the electronic equipment button exits the setting mode immediately without changing the status prior to setting.

4.Pressing any of the electronic equipment buttons to enter factory setting operation mode.

5.The default current electronic equipment is TV upon first power-on.

Electronic

Code

Note

equipment

 

 

 

 

 

TV

1001

Provided by

manufacturer

 

 

 

 

 

CABLE

--

Transmit TV code

 

 

 

AUDIO

--

Transmit TV code

 

 

 

DVD

--

Transmit TV code

 

 

 

42

Page 43
Image 43
HANNspree S_ST55F_UM_US_V01_H manual Factory Setting Mode