13
Troubleshooting
Situation | Solution | |
|
| |
| • Connect the power cord properly. | |
| • Press the POWER button on the control | |
| panel or remote control. | |
| • Press the SOURCE button to cycle | |
No picture and sound. | through connected video sources. | |
• Press the CH UP or CH DOWN button to | ||
| switch to other TV stations. | |
| • Check the TV/CATV OSD settings. See | |
| “TV/CATV” on page 47. | |
| • Make sure all cables are connected prop- | |
| erly. | |
|
| |
| • Check the antenna and cable connec- | |
No picture, or poor picture, | tions. | |
sound is OK. | • Adjust the brightness in the OSD menus. | |
| See “Brightness” on page 33. | |
|
| |
Picture is not in color. | • Adjust the saturation in the OSD menus. | |
See “Saturation” on page 37. | ||
| ||
|
| |
| • Press the VOL UP button on the control | |
Picture is OK, no sound. | panel or remote control. | |
• Make sure the MTS option is set to MAIN | ||
| ||
| or MONO. | |
|
| |
One of the speakers has no | • Adjust the balance in the OSD menus. | |
sound. | See “Balance” on page 43. | |
|
| |
Can’t receive some TV channels | • Try the Auto Program function in the OSD | |
“TV Setting” menu. See “Auto Program” | ||
using cable TV. | ||
on page 49. | ||
| ||
|
| |
Want to reset TV settings. | • Use the Preset function in the OSD Pic- | |
ture and Audio menu. | ||
| ||
|
| |
| • If OSD items are colored light blue, the | |
Cannot operate menus. | system is in a state such that those set- | |
tings are not available. For example, video | ||
| ||
| setting is available in TV mode. |
54 
