Harbor Freight Tools 34202 operating instructions Operations, Loading Abrasives, #12 -- SKU

Note:

Place your Air Compressor in

another room to prevent

damage to it.

OPERATIONS

Loading Abrasives

Step 1: Check to insure the abrasives are dry and clean so that they do not clog the unit.

Step 2: Close the AIR SUPPLY VALVE (#18) by turning it to the horizontal position.

Warning!

Always wear your hood, dust mask, and heavy-duty canvas gloves when operating the Sand Blaster.

Step 3: Open the NOZZLE SHUT OFF VALVE (#18C) by turning it to the vertical position.

Step 4: Make sure the PRESSURE GAUGE (#15) reads “0”.

Step 5: Remove the TANK CAP (#12).

Step 6: Using the FUNNEL (#29), pour the selected abrasive medium into the TANK (#1). Do not fill more than 3/4 of the TANK. If humidity in your region is 90% or more,

only fill the tank 1/2 way, and check the WATER TRAP (#17) more frequently.

Step 7: Close the TANK CAP.

Step 8: Close the NOZZLE SHUT OFF VALVE and open the AIR SUPPLY VALVE.

Step 9: Check for leaks at the TANK CAP as pressurization begins.

Step 10: Open the NOZZLE SHUT OFF VALVE to begin blasting.

Page #12 -- SKU 34202