Harbor Freight Tools 42203 General Safety Rules, Work Area, Electrical Safety

Models: 42203

1 14
Download 14 pages 51.76 Kb
Page 2
Image 2

THANK YOU for choosing a HARBOR FREIGHT TOOLS product. For future reference, please complete the owner’s record below:

Model_____________

Serial No.__________

Purchase Date___________

SAVE THE RECEIPT, WARRANTY AND THESE INSTRUCTIONS. It is important that you read the entire manual to become familiar with the unit BEFORE you begin assembly.

 

Technical Specifications

 

Tool Name:

4” Angle Grinder

 

SKU:

42203

 

Motor:

120V/ 60Hz, Single Phase, 11,000 RPM

 

Cord Length:

8 FT. 2 Prong UL Approved

E194601

Spindle:

5/8” X 11 TPI with 7/8” Arbor

Grinding Wheel:

4” X 1/4” X 7/8”

 

GENERAL SAFETY RULES

WARNING!

READ AND UNDERSTAND ALL INSTRUCTIONS

Failure to follow all instructions listed below may result in

electric shock, fire, and/or serious injury.

SAVE THESE INSTRUCTIONS

WORK AREA

1.Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents.

2.Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.

3.Keep bystanders, children, and visitors away while operating a power tool. Distractions can cause you to lose control. Protect others in the work area from debris such as chips and sparks. Provide barriers or shields as needed.

ELECTRICAL SAFETY

4.Grounded tools must be plugged into an outlet properly installed and grounded in accordance with all codes and ordinances. Never remove the grounding prong or modify the plug in any way. Do not use any adapter plugs. Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. If the tools should electrically malfunction or break down, grounding provides a low resistance path to carry electricity away from the user.

5.Double insulated tools are equipped with a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician

to install a polarized outlet. Do not change the plug in any way. Double insulation eliminates the need for the three wire grounded power cord and grounded power supply system.

SKU 42203

REV 01/04

Page 2

Page 2
Image 2
Harbor Freight Tools 42203 General Safety Rules, Work Area, Electrical Safety, Read and Understand ALL Instructions