Side Handle (401)
Brush Cap (30) Wing Nut (60)
Wing Bolt (58)
Base Assy. (52)
Figure D | Figure E |
Prepare Material Before Cutting
Lock Handle (55)
1.Support large panels to minimize risk of blade pinching and saw kickback.
2.Use the supplied Rip Guide (402) when ripping material by sliding it into the Base Assy. and tightening Wing Bold (58). See Figures F and G below.
3.Securely clamp material to be cut to work bench.
4.Make sure saw does not cut into supports or workbench.
5.Use the appropriate type of blade for the material you are cutting.
Figure F
Figure G
SKU 47613 | Page 11 |
