Harbor Freight Tools 47613 operating instructions California Health & Safety Code 25249.5, et seq

11.Never touch moving parts. Never place your hands, fingers or other body parts near the tool’s moving parts.

12.Never operate without automatic guard return in place. Do not disable blade guard when cutting.

13.Guard against kickback. Kickback occurs when the saw stalls and is driven backwards toward the operator. When this happens, release trigger switch immediately.

14.Unplug Circular Saw Line Cord before making adjustments.

15.When operating, keep Line Cord away from the cutting area.

16.Never operate the Circular Saw with its saw blade facing upward.

17.After cutting, wait for the saw blade to stop turning before setting the unit down.

18.Only use a 9” saw blade on this Circular Saw. The blade must have a speed rating of 4,000 RPM or greater.

19.

20.

WARNING! Some dust created by power sanding, sawing, grinding, drilling, and other construction activities, contain chemicals known (to the State of California) to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement or other masonry products, arsenic and chromium from chemically treated lumber. Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles.

(California Health & Safety Code 25249.5, et seq.)

WARNING! People with pacemakers should consult their physician(s) before using this product. Operation of electrical equipment in close proximity to a heart pacemaker could cause interference or failure of the pacemaker.

SKU 47613 Page 6 REV 07l