Harbor Freight Tools 68333 manual For technical questions, please call

cleaning efficiency. Turn on the water source and power, and rinse off all detergent completely.

8.Hold the Water Gun at about a 45° angle and steadily sweep the stream back and forth; if a severe, head-on angle is used, dirt may imbed in the surface being cleaned. Follow a steady, consistent pace during cleaning; this will help prevent stripes or discoloration afterwards. If streaking or uneven cleaning is noted at the end of a project,

go over the edges of the streaks with a wide fan pattern to help blend these lighter areas in.

9.If several different surfaces are to be cleaned, be careful not to damage any of the less solid surfaces while trying to clean the harder ones.

This is especially a concern when cleaning tile and grout, bricks and mortar, or stones and mortar.

10.If wood is being cleaned, be careful to avoid damage. Wood will usually require resurfacing (Sanding) and re-coat with a surface protectant (wood, stain, varnish) after it has dried. Try to avoid leaving water on a wooden surface; doing so can harm the surface.

SKU 68333 For technical questions, please call 1-800-444-3353. Page 11