Instructions for Putting into Use
Read the entire Important Safety Information section at the beginning of this manual including all text under subheadings therein before set up or use of this product.
To prevent serious injury from accidental operation:
Turn the Power Switch of the tool off, unplug the tool from its electrical outlet, shut off the water supply and safely discharge all residual
water pressure from the unit before assembling or making any adjustments to the tool.
Check the Inlet Strainer for any blockage, including packaging debris. The Pressure Washer may
be shipped with a plastic plug in the Inlet.
Note: For additional information regarding the parts listed in the following pages, refer to Parts List and Assembly Diagram on page 14. Some of the following assembly steps may have been performed at the factory.
Components
Handle |
|
|
| Soap Dispenser |
|
|
| ||
|
|
|
|
Power
SwitchExtension
Nozzle
Body
Water Supply
InletSpray Gun (on back)
High Pressure
Hose
Pressure Hose Outlet
Note: Check for and remove any shipping plugs from the Water Supply Inlet and Pressure Hose Outlet on the front of the machine.
Page 6 | For technical questions, please call | SKU 68333 |
