Harbor Freight Tools 68333 manual Assembly, For technical questions, please call

Assembly

1.Snap the Body onto the Base until it clicks into place.

2.Attach the Handle to the front of the Body with four of the Screws.

3. Attach the Strap for the Soap Dispenser to the Base with the remaining two Screws.

4. Thread the High Pressure Hose onto the Pressure Hose Outlet on the front of the body.

5.Snap the High Pressure Hose to the Spray Gun until it clicks

in place.

6.Place the Water Filter in the Water Supply Inlet and thread the adapter

onto the Inlet.

Note: To remove the Pressure Hose from the Spray Gun, press and hold the hose release button on the side of the Spray Gun and pull out the hose.

SKU 68333 For technical questions, please call 1-800-444-3353. Page 7