UNPACKING

When unpacking, check to make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible.

1.NOTE: For this procedure, you will need the assistance of additional personnel and an adequate lifting device (not included).

2.Remove the box surrounding the Bandsaw using appropriate tools, being careful not to injure yourself from sharp fasteners.

3.Search for and remove all bolts securing the Bandsaw to the pallet.

Warning: At this point the Bandsaw could easily tip, causing serious in- jury. Have assistants stabilize the bandsaw.

4.Use the lifting device to lift the Bandsaw off the pallet and set it on a flat location on the floor that is capable of properly supporting its weight.

ASSEMBLY INSTRUCTIONS

NOTE:

For additional information regarding the parts listed in the following pages, refer to the Assembly Diagrams on pages 32 and 33.

WARNING! Always make sure the Toggle Switch (11) for the Bandsaw and the Toggle Switch (37) for the Coolant Pump are both in their “OFF” position and the tool is unplugged from its electrical outlet prior to assembling the tool, adding any accessories, or making adjustments to the tool.

A - Attach The Wheels

Note: For this procedure, you will need the assistance of additional personnel and an adequate lifting device (not included).

1.Use the lifting device to raise the Left Leg (2) of the Bandsaw about six inches off the floor. Once the Left Leg is lifted, insert a Wheel Shaft (35) through the two holes located at the bottom of the Left Leg.

2.Slide one Wheel (34) on each end of the Wheel Shaft. Place one Washer (33) on each end of the Wheel Shaft. Insert one Cotter Pin (36) through the hole in each end of the Wheel Shaft. Then, make sure to bend the Cotter Pins to secure the Wheels in place. (See Figure E.)

3.Repeat Steps #1 & 2 for the Right Leg (3), remaining Wheel Shaft (35), and remain- ing Washer (33) and Cotter Pin (36). (See Figure E.)

SKU 93507

For technical questions, please call 1-800-444-3353.

Page 11

Page 10 Page 12
Page 11
Image 11
Harbor Freight Tools 93507 operating instructions Unpacking, Assembly Instructions, Attach The Wheels
Page 10 Page 12

93507 specifications

Harbor Freight Tools 93507 is a powerful portable generator designed for convenience and reliability during power outages or outdoor activities. This generator is an ideal choice for homeowners, campers, and DIY enthusiasts, providing an efficient power solution in various situations.

The Harbor Freight Tools 93507 boasts a robust 4000 running watts and 5000 starting watts, ensuring a steady power supply for critical appliances and tools. Equipped with a reliable 7 HP, 196cc OHV engine, this generator delivers efficient performance while maintaining a relatively low noise level, making it suitable for both residential and recreational use.

One of the most notable features of the 93507 is its low oil shutdown system. This technology automatically turns off the engine to prevent damage caused by low oil levels, ensuring longevity and reducing maintenance concerns for users. Additionally, this generator includes a built-in fuel gauge, allowing users to monitor fuel levels with ease and helping to prevent unexpected shutdowns during operation.

Portability is another key characteristic of the Harbor Freight Tools 93507. It is designed with a compact and lightweight frame, making it easy to transport to job sites, camping trips, or any location where power is needed. The generator features a sturdy handle and flat-free tires, allowing for effortless maneuverability over various terrains.

The 93507 also comes equipped with multiple output options, including two 120V AC outlets and one 12V DC outlet. This variety allows users to connect a wide range of devices, from household appliances to outdoor equipment. The generator's surge protection feature ensures that sensitive electronics are safeguarded against power spikes, providing peace of mind for users.

In terms of fuel efficiency, the Harbor Freight Tools 93507 can run for up to 12 hours on a full tank, depending on the load. This impressive runtime means less frequent refueling, enhancing its usability during extended outdoor excursions or emergency situations.

Overall, the Harbor Freight Tools 93507 generator combines power, portability, and safety into a reliable tool for all your energy needs. With its durable design and advanced features, it stands out as an exceptional choice for anyone seeking a dependable portable power source.
Top Page Image Contents