WHEEL

 

BLADE TENSION KNOB

(175)

 

(181)

 

 

BLADE

UPPER

 

 

 

 

SCREW (168)

 

 

BACK

 

 

 

 

 

COVER

 

 

 

(128)

 

 

 

 

ADJUSTING

 

 

 

SCREW

 

 

 

(168)

FIGURE R

Adjusting The Blade Tension:

1.Turn the Blade Tension Knob (181) clockwise to increase tension on the Saw Blade (127). Turn the Blade Tension Knob counterclockwise to decrease tension on the Saw Blade. Correct tension is acquired when the Saw Blade is just tight enough so that no slippage occurs between the Saw Blade and the Wheels (124, 175).

2.NOTE: When the Bandsaw is not in use over long periods of time, release the ten- sion on the Saw Blade (127).

Adjusting The Feed Rate:

1.Excessive feed pressure can break the Saw Blade (127). Insufficient feed pressure dulls the Saw Blade rapidly.

2.The Cylinder (20) controls the blade speed during horizontal cutting. The hydraulic feed control is turned on or off via the small lever on the small cylinder. The speed is controlled during or right before horizontal cutting.

IMPORTANT: When the cylinder is in the OFF position, the Saw Arm will lock into the vertical position. Never force the Saw Arm down. If the Saw Arm descends while the Cylinder is in the OFF position, disconnect the unit from power and do not use the tool until the hydraulic feed has been repaired.

3.The Spring (87) may also need to be adjusted to ensure a proper feed rate. Loosen the Nut (91) on the right one turn. Loosen the nut on the left one turn to decrease the feed rate or tighten the Nut on the left one turn to increase feed rate. After adjusting, tighten the Nut on the right securely while holding the left nut still. (See

Figure S.)

SPRING

NUT (91)

ADJUSTING

ROD

 

(88)

NUT (91)

 

FIGURE S

SKU 93507

For technical questions, please call 1-800-444-3353.

Page 19

Page 19
Image 19
Harbor Freight Tools 93507 operating instructions Adjusting The Blade Tension, Adjusting The Feed Rate

93507 specifications

Harbor Freight Tools 93507 is a powerful portable generator designed for convenience and reliability during power outages or outdoor activities. This generator is an ideal choice for homeowners, campers, and DIY enthusiasts, providing an efficient power solution in various situations.

The Harbor Freight Tools 93507 boasts a robust 4000 running watts and 5000 starting watts, ensuring a steady power supply for critical appliances and tools. Equipped with a reliable 7 HP, 196cc OHV engine, this generator delivers efficient performance while maintaining a relatively low noise level, making it suitable for both residential and recreational use.

One of the most notable features of the 93507 is its low oil shutdown system. This technology automatically turns off the engine to prevent damage caused by low oil levels, ensuring longevity and reducing maintenance concerns for users. Additionally, this generator includes a built-in fuel gauge, allowing users to monitor fuel levels with ease and helping to prevent unexpected shutdowns during operation.

Portability is another key characteristic of the Harbor Freight Tools 93507. It is designed with a compact and lightweight frame, making it easy to transport to job sites, camping trips, or any location where power is needed. The generator features a sturdy handle and flat-free tires, allowing for effortless maneuverability over various terrains.

The 93507 also comes equipped with multiple output options, including two 120V AC outlets and one 12V DC outlet. This variety allows users to connect a wide range of devices, from household appliances to outdoor equipment. The generator's surge protection feature ensures that sensitive electronics are safeguarded against power spikes, providing peace of mind for users.

In terms of fuel efficiency, the Harbor Freight Tools 93507 can run for up to 12 hours on a full tank, depending on the load. This impressive runtime means less frequent refueling, enhancing its usability during extended outdoor excursions or emergency situations.

Overall, the Harbor Freight Tools 93507 generator combines power, portability, and safety into a reliable tool for all your energy needs. With its durable design and advanced features, it stands out as an exceptional choice for anyone seeking a dependable portable power source.