INSPECTION, MAINTENANCE, and Cleaning

automatically lower on its own, while it gradually feeds the Saw Blade (127) into the workpiece. Do not force the Bandsaw to remove material faster than it is designed to cut. NOTE: The speed at which the Saw Arm moves downward may be increased or decreased by adjusting the valve on the Hydraulic Cylinder (20).

(See Figure V.)

14.Never attempt to remove material stuck in the moving parts of the Bandsaw while it is plugged in and running. Turn off the Bandsaw if the workpiece is to be backed out of an uncompleted cut.

15.IMPORTANT: When in the horizontal cutting mode only, the Motor Toggle Switch

(37)will automatically turn to its “OFF” position and shut off the Bandsaw’s Mo- tor when the cut has been completed.

16.Once the cut is made, check to make sure the Motor Toggle Switch (37) is in its “OFF” position. Turn the Coolant Pump Toggle Switch (11) to its “OFF” position. Turn the Coolant Pump Valve (159) to its “CLOSED” position. Then, unplug the Power Cord Plug (38) from its electrical outlet. (See Figure V.)

17.Wait until the Saw Blade (127) comes to a complete stop. Then, raise the Saw Head to its full vertical position. Turn the Hydraulic Cylinder (20) to its “OFF” position to lock the Saw Head in place. Remove the workpiece from the Vise as- sembly (94, 95) and scrap material from the Table (39) of the Bandsaw.

(See Figure V.)

18.Turn the Hydraulic Cylinder (20) to its “ON” position. Adjust the feed rate if needed (by turning the knob on the Cylinder counterclockwise), and slowly allow the Saw Head to lower to its horizontal position. (See Figure V.)

1.WARNING! Make sure the Motor Toggle Switch (37) and Coolant Toggle Switch (11) of the Bandsaw is in their “OFF” positions and the tool is unplugged from its electrical outlet before performing any inspection, maintenance, or cleaning pro- cedures.

2.Before each use, inspect the general condition of the Bandsaw. Check for loose screws, misalignment or binding of moving parts, cracked or broken parts, dam- aged electrical wiring, and any other condition that may affect its safe operation. If abnormal noise or vibration occurs, have the problem corrected before further use.

Do not use damaged equipment.

REV 10/06

SKU 93507

For technical questions, please call 1-800-444-3353.

Page 24

93507 specifications

Harbor Freight Tools 93507 is a powerful portable generator designed for convenience and reliability during power outages or outdoor activities. This generator is an ideal choice for homeowners, campers, and DIY enthusiasts, providing an efficient power solution in various situations.

The Harbor Freight Tools 93507 boasts a robust 4000 running watts and 5000 starting watts, ensuring a steady power supply for critical appliances and tools. Equipped with a reliable 7 HP, 196cc OHV engine, this generator delivers efficient performance while maintaining a relatively low noise level, making it suitable for both residential and recreational use.

One of the most notable features of the 93507 is its low oil shutdown system. This technology automatically turns off the engine to prevent damage caused by low oil levels, ensuring longevity and reducing maintenance concerns for users. Additionally, this generator includes a built-in fuel gauge, allowing users to monitor fuel levels with ease and helping to prevent unexpected shutdowns during operation.

Portability is another key characteristic of the Harbor Freight Tools 93507. It is designed with a compact and lightweight frame, making it easy to transport to job sites, camping trips, or any location where power is needed. The generator features a sturdy handle and flat-free tires, allowing for effortless maneuverability over various terrains.

The 93507 also comes equipped with multiple output options, including two 120V AC outlets and one 12V DC outlet. This variety allows users to connect a wide range of devices, from household appliances to outdoor equipment. The generator's surge protection feature ensures that sensitive electronics are safeguarded against power spikes, providing peace of mind for users.

In terms of fuel efficiency, the Harbor Freight Tools 93507 can run for up to 12 hours on a full tank, depending on the load. This impressive runtime means less frequent refueling, enhancing its usability during extended outdoor excursions or emergency situations.

Overall, the Harbor Freight Tools 93507 generator combines power, portability, and safety into a reliable tool for all your energy needs. With its durable design and advanced features, it stands out as an exceptional choice for anyone seeking a dependable portable power source.

Harbor Freight Tools 93507 INSPECTION, MAINTENANCE, and Cleaning, Do not use damaged equipment

Models: 93507

(See Figure V.)

(See Figure V.)