Submersible Dirty Water Pump

Model 93819 - 1 HP

Model 93820 - 1.2 HP

ASSEMBLY AND OPERATING INSTRUCTIONS

Due to continuing improvements, actual product may differ slightly from the product described herein.

Distributed exclusively by

Harbor Freight Tools®.

3491 Mission Oaks Blvd., Camarillo, CA 93011

Visit our Web site at: http://www.harborfreight.com

TO PREVENT SERIOUS INJURY,

READ AND UNDERSTAND ALL WARNINGS

AND INSTRUCTIONS BEFORE USE.

without the express written consent of Harbor Freight Tools.

For technical questions, please call 1-800-444-3353.

Revised 08i

Page 1

Image 1

Harbor Freight Tools 93819, 93820 manual For technical questions, please call, Submersible Dirty Water Pump, Revised

Contents

ASSEMBLY AND OPERATING INSTRUCTIONS For technical questions, please callSUBMERSIBLE DIRTY WATER PUMP Model 93819 - 1 HP Model 93820 - 1.2 HP GENERAL SAFETY RULES PRODUCT SPECIFICATIONSSAVE THIS MANUAL WORK AREA PERSONAL SAFETY ELECTRICAL SAFETY2. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes SERVICE SPECIFIC SAFETY RULESTOOL USE AND CARE Drip Loop 8. Make sure to position the Pump on a flat, level, solid surfaceFIGURE A OUTLET PUMP DEVICE OUTLET CORD GROUNDING 11. NEVER raise or lower the Pump by its electrical Power Cord14. Industrial applications must follow OSHA requirements SAVE THESE INSTRUCTIONS FIGURE B DOUBLE INSULATED TOOLS TOOLS WITH TWO PRONG PLUGS GROUNDED TOOLS TOOLS WITH THREE PRONG PLUGSFIGURE C THIS PRODUCT USES A 3-PRONG ELECTRICAL PLUG 120 VOLT GROUNDED ASSEMBLY AND OPERATING INSTRUCTIONS SYMBOLOGYUNPACKING FIGURE D FIGURE E See Figure EPOWER CORD & PLUG FLOAT SWITCH LOCK 1/8” AIR BLEED HOLE Cord 1 or Discharge Pipe. See Figure E INSPECTION, MAINTENANCE, AND CLEANING1 HP Model 93819 = 26 Feet 1.2 HP Model 93820 = 28 Feet See Figure F and Assy. Diagram TROUBLESHOOTINGFIGURE F Problem PLEASE READ THE FOLLOWING CAREFULLY PARTS LIST and are not available individually as replacement parts ASSEMBLY DIAGRAMSome parts are listed and shown for illustration purposes only Limited 1 year / 90 Day warranty 3491 Mission Oaks Blvd. PO Box 6009 Camarillo, CA 93011 800

Harbor Freight Tools 93819, 93820 manual For technical questions, please call, Revised

Models: 93819 93820