Harbor Freight Tools 94071 Keep all Guards in place and in proper working order

7.Keep all Guards in place and in proper working order.

8.Remove adjusting keys and wrenches. Check to make sure all adjusting keys and wrenches are removed from this tool before turning it on.

9.Never attempt to remove material stuck in the moving parts of the Grinder while the tool is turned on, plugged in, or running.

10.Use light pressure when starting to grind. Too much pressure on a cold Grinding Wheel (40) can cause the wheel to crack.

11.When replacing the Buffing Wheel (39) and/or Grinding Wheel (40), make sure each wheel has a minimum 3500 RPM rating.

12.When replacing the Grinding Wheel (40), do not overtighten the Hex Nut (41). Excessive tightening can cause the Grinding Wheel to crack during operation. Be sure to reassemble all Flanges (37).

13.Adjust the distance between the Buffing Wheel (39)/ Grinding Wheel (40) and Moveable Tool Rest (5) to maintain a 1/16” or less separation as the diameter of the wheels decrease with use.

14.Turn off the Grinder, unplug its Power Cord/Plug (13) from its 120 volt, grounded, electrical outlet, and allow the tool to completely stop prior to performing any inspection, maintenance, or cleaning on the unit.

15.Use the right tool or attachment for the job. Do not attempt to force a small tool or attachment to do the work of a larger industrial tool. There are certain applications for which this product was designed. It will do the job better and more safely at the rate for which it was intended. Do not modify this product, and do not use this product for a purpose for which it was not intended.

16. WARNING! Some dust created by power sanding, sawing, grinding, drilling, and other construction activities, contain chemicals known (to the State of California) to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement or other masonry products, arsenic and chromium from chemically treated lumber. Your risk from these exposures varies, how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles.

(California Health & Safety Code 25249.5, et seq.)

SKU 94071 For technical questions, please call 1-800-444-3353 PAGE 6